It is always good to start with the basics. Skis or snow boards do not ride on snow! They ride on water. As a ski slides over snow, friction melts a thin layer of the snow, turning it into water over which your ski/board glides. The water then re-freezes after the ski/board has passed, leaving a fresh track on the trail.
Ski/board’s bases are made of plastic (usually polyethylene) with a specially-designed structure. This structure helps channel the water from the tip to the tail of the ski as you ski/ride down the hill. The idea here is to reduce the friction causing the ski to glide more easily and with less friction. Less friction means more speed.
Wax is used to reduce this friction even further, and preserve the integrity and structure of the ski. Over the years, typical waxes have been made from paraffin wax (a product derived from petroleum). As skiers became more conscious of the benefits of wax, wax formulators introduced additives into their products, such as fluorocarbons. These chemicals are excellent in reducing friction having a very low coefficient of friction. Overall, fluorocarbon waxes are great; however, they are dangerous to your health if you happen to breathe in the fumes during application. They hurt the environment, introducing fluorine into the snow. As for high fluorinated waxes, most skiers will not even experience the full benefit of the wax because they are designed specifically for high-humidity snow conditions. Additionally, these waxes are very costly.
To combat these shortcomings of highly-fluorinated and potentially dangerous waxes, we borrowed a technology from the cosmetic industry.
This additive is not hazardous to your health and is more eco-friendly. Its coefficient of friction is very close to fluorocarbon, making it an excellent replacement additive. Both GI1K and 2K utilize this technology. The GI2K contains a highly advanced polymer which makes it more durable and longer lasting.
If you were wondering why waxes are made to perform at different temperature snow conditions, the reason is simple: The colder the snow, the harder the crystals. It is most beneficial to use a wax with a hardness matching that of the snow. Therefore, all Green Ice ski waxes have been formulated with differing levels of hardness. If however, the snow conditions will be unknown, choose the middle temperature wax (18-28 degrees F) as this wax will suffice for most conditions a rider/skier experiences.
Green Ice 1K and 2K waxes have been proven to be very durable. They last longer than average fluorocarbon waxes and tend not to whiten the base of the board or ski. They perform well in all humidity conditions. Green ice 2K has excellent static and dynamic properties. There is minimal stick upon take off and your skis will glide over any terrain the mountain throws at you.
Finally our Green Ice Ultimate ski wax is 100% safe for the environment. We borrowed the plant waxes used in the automobile industry to create an environmentally friendly wax with plant bi-products as the only raw materials. Green Ice Ultimate uses absolutely no chemicals, solvents or plasticizers, only pure natural materials made from plants. Green ice Ultimate also incorporates a natural friction reducing additive, making it an excellent race wax or everyday recreational formula.
In summary: Green Ice ski waxes are more durable and longer lasting. They work over a wide range of snow temperatures and in all humidity conditions. They are also eco-friendly and do not require a respirator to make the application process safe. Finally you will find them a cost effective wax solution for all skiing and riding levels.